Compatibility:
This hybrid inverter is suitable for 48v or 51.2v lithium batteries and flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.
Efficient
Dual MPPT with up to 99.9% efficiency
Up to 22A PV input current perfect for high power modules
All in One
Solar Charger Controller up to 200A charging current
Support for Li-ion battery BMS communication
Reliable
Outputs high quality pure sine wave AC power
8-10kW load power to meet the needs of most households
Off-grid Inverter two Working Modes
This hybrid PV inverter can provide power to connected loads by utilizing PV power,utility power and battery power.
Depending on different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge battery. This inverter is only compatible with PV module types of single crystalline and poly crystalline. Do not connect any PV array types other than these two types of PV modules to the inverter. Do not connect the positive or negative terminal of the solar panel to the ground. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter.
- Pure off-grid working mode: working as traditional off-grid inverters, can set the output to utility first, battery first, or solar first.
- Hybrid working mode: working as a hybrid, support solar and utility jointly take the load, can set to the self-consumption mode or charge priority mode.
Key functions:
- Our Humless tyle Universal 10 kW Hybrid Inverter is designed to provide continuous power from PV solar arrays, batteries, generators and the grid.
- When the MPPT input voltage of the solar array is within acceptable range, the Inverter is able to generate power to feed the grid (utility) and charge the batteries.
- The Inverter is an all-in-one inverter that incorporates dual MPPT inputs for solar without the need for a charge controller, a battery charger, or integrated AC transfer switch.
- It is designed to integrate and optimize multiple AC generation sources such as the grid and generators for battery charging and powering loads.
- We have time of use and load shaving settings, allowing your storage to use the grid to charge at lower prices when the utility offers a better rate, and also discharge off the battery storage at higher costs.
Reviews
There are no reviews yet.